Adding the Sport Chrono Package to your Porsche 718 Boxster is a fantastic way to enhance your driving experience. This upgrade provides improved dynamic performance and access to advanced driving modes, all while integrating seamlessly with your vehicle’s existing systems.

What You’ll Need

  • Sport Chrono Package kit compatible with the 718 Boxster
  • Basic hand tools (screwdrivers, socket set)
  • OBD-II diagnostic tool for coding
  • Access to Porsche’s PIWIS diagnostic software (recommended)
  • Protective gloves and clean workspace

Step-by-Step Installation Guide

  1. Prepare the Vehicle: Ensure the car is parked on a flat surface with the ignition off. Disconnect the battery to avoid electrical issues.
  2. Remove the Steering Wheel Trim: Carefully remove the airbag and trim pieces to access the steering wheel’s control module.
  3. Install the Sport Chrono Switch: Replace the existing clock or cover with the Sport Chrono switch provided in the kit. Secure it firmly.
  4. Connect the Module: Attach the wiring harness from the Sport Chrono package to the appropriate control unit in the steering column.
  5. Reassemble Components: Reinstall the steering wheel trim and airbag, ensuring all clips and screws are tightly secured.
  6. Perform Software Coding: Using an OBD-II tool and Porsche PIWIS software, code the new Sport Chrono module to activate features such as Launch Control and dynamic driving modes.
  7. Test the Installation: Reconnect the battery, start the vehicle, and verify that the Sport Chrono display and functions are operational.

With these steps completed, your Porsche 718 Boxster will benefit from enhanced performance controls and a more engaging drive. Remember to consult your vehicle’s manual and seek professional assistance if you’re unsure about any step.